Alpine MRV-F300 Full Review And Details: A Great Sounding 4 Channel Amp You Can Afford

I’ve been a huge fan of Alpine products and have been for years. I love my 4 channel amps and I’ve been enjoying fantastic sound for many years now.

Having the flexibility that a 4 channel amp gives is great when it comes time to upgrade your system later.

When it comes down to it, you don’t need a super-expensive amplifier to enjoy great sound quality. However, you do need to pick one that’s a well-rounded great choice.

I’ll tell you all you might want to know about the MRV-F300 before buying. Read on to learn more.

Alpine MRV-F300 review – First impressions

It’s a great looking amp, very compact, and housed in a well-designed dark brushed metal chassis. It feels solid in the hand, but it’s still relatively lightweight compared to conventional older amps of the same power rating.

I have owned other amps in the past with the same power rating and they easily weighed 3 times as much as the MRV-F300 does! It measures just under 5 lbs (around 2.3 kgs).

Build quality is great, and I notice there aren’t huge gaps or misaligned parts like on cheaper amps of the same Class D technology. I’ve tested other type D amps before, and easily noticed they weren’t put together well or felt a bit flimsy and just didn’t feel solid. That’s not the case here.

Holding Alpine MRV-F300 amp in my hand

The amp looks great and the connectors are high-quality. You can make more reliable connection unlike lesser amps with standard screw terminals. Fit and finish are excellent, with no big gaps or sloppy assembly. The blue light on top glows when it is turned on (but not TOO bright, it’s not annoying). My opinion so far? NICE!

Connectors are very high quality and use hex-keyed screws to securely hold wiring connections. Connectors are clearly labeled, and take the guesswork out of bridging the amp if you choose to do so for more power.

The power connectors are circular inside and 8 gauge power wire will fit and is recommended for installation.

I really like what Alpine has done with the protective end caps it comes with – unlike amps in the past, they’re easy to get on and off.

They snap on and off! If you choose to mount it under a seat in your car or truck they’re great for protecting the wiring from shorts if you happen to have tools or coins lying around in your interior like I do at times.

Also, it just plain looks nice with them on!

By the way – upon opening the box you’ll find an Alpine Verification Certificate detailing the operation and performance of the amp you bought! Very nice.

MRV-F300 amplifier design and performance details

A huge advantage – compact size

Image of MRV-F300 amplifier top

The MRV-F300 has a cool glowing light on the top when powered to indicate it’s on. I love the compact size and honestly, I’m impressed with what they’ve fit into such a small package (Shown with end caps installed)

There’s a huge range of Class D car amps on the market today and most are pretty compact. The problem is that a well-designed car amp with decent power and GOOD quality sound requires a bigger circuit board and more parts – and that means a bigger size.

Alpine, for several decades, has been several steps ahead of the lesser brands. They use surface-mount component technology (SMT) to reduce the size required in order to make a smaller and better-sounding amplifier.

Measuring only 7 7/8″ W x 6.5″ D x 2 3/16″ H (200 x 165 x 55 mm) it’s crazy small and can fit in creative places that older amps could never even come close to fitting in!

That’s a huge advantage! You could even fit one amp under each seat in some cases for a great way to have a multi-amp system that thieves won’t see.

Class D amp technology

Class D amplifiers are one of the most recent developments in the audio world. Unlike conventional Class A/B designs (which most car audio amps still use to this day) that are around 50% efficient, a Class D amplifier uses ultra-fast switching technology to bring efficiency to near 90%!

This means since you are no longer wasting huge amounts of power (which turn into heat, by the way) the amp can be reduced greatly in size and doesn’t need a huge power supply internally.

However, as I mentioned at the beginning of my review, there’s something you need to know: Class D amps have higher “noise floors”, another name for the baseline noise or “hiss” level you hear when the gain is turned up.

Also, these types of amplifiers must be well-designed to ensure the technology use doesn’t modify your music signal (distortion) when amplified.

That’s what they’ve done, as Alpine uses their own engineering rather than repackage and relabel a lower-end audio amp as some competitors do.

The end result is the ability to provide up to:

  • 50W RMS per channel into a 4 ohm speaker x 4
  • 75W RMS per channel into a 2 ohm speaker x 4
  • 150 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode)

Performance and sound quality

Sound quality is just great as you’d expect from Alpine: music is full and clear, highs are bright and crisp, and bass is solid and easily drives speakers without giving out. It’s an excellent sounding amplifier and a winner! In the past, I had my doubts about Class D car amps (after having a few bad experiences) but the MRV-F300 has changed my mind. It’s that good.

Bass hits hard and has a great impact, just as you’ve come to enjoy from conventionally larger amplifiers.

If you’re planning to drive subwoofers with moderate power and volume (up to 150W each) you won’t be disappointed. If you need slamming bass, however, I’d consider the sibling MRV-M500, a mono amp with much more power available in the same size.

I have excellent hearing and based on my audio design & listening experience, I can definitely recommend this little powerhouse.

Alpine MRV-F300 4 channel amp end viewThe MRV-F300 features full range, low pass, or high pass crossover settings including 50-400Hz adjustable cutoff. A bass EQ (boost) feature is built-in too.

Audio controls

The crossover functions are easy to use. Controls and switches have a good, solid “feel” to them. One thing I’ve always noticed about Alpine Electronics is their products use good components that don’t feel sloppy when making adjustments. They also don’t change due to vibration over time after I’ve spent time & effort setting them up.

This amp is no different.

Note: the bass EQ boost is works only for the 3/4 channel pair when turned on. I’ve taken off points in my review score at the bottom as this feature in my opinion should be on 1/2 also.

One thing you need to know is that because it’s a Class D amp, by nature the noise level can be heard more when the gain is turned up higher. I definitely recommend adjusting the gain to a lower level that will still give adequate volume when the stereo is turned up high.

Alpine has done a great job in designing the amp, but it’s one of the trade-offs of this type of amp. Still though, it sounds wonderful and noise levels are basically imperceptible in most cases.

Additional features and installation

The great news is that it’s still easy to install – just like any other car amp as screw mounting is used to mount on tabs on each end of the amp (one pair of tabs on the control end and one pair on the power & speaker connection side.

It also works with speaker level inputs so it’s great for factory stereos too!

Alpine MRV-F300 installed under seat

The amp fits great under seats and can still leave room for speaker crossovers! Here’s an example of a custom install using the amp when space is limited.

Actually if needed, because of its light weight, in more difficult installations you could even use industrial strength Velcro or some type of reliable double-sided tape to mount it if necessary. The amp won’t heat up and cause the adhesive to lose strength, unlike amps in the past.

As I mentioned earlier it looks more professional to use it with the end caps snapped on, but I’ll leave that up to you to decide.

Quick tip: Because the amplifier’s mounting tabs face inward, it may be a bit hard to install under a seat. Be prepared to use a short screwdriver or even remove the seat to make your job easier when installing.

Accessories included

You’ll get the following inside the box:

  • 7.5″ Speaker-level input harness
  • 2 snap-on terminal covers
  • Four 3/4″ Self-tapping hex-head screws
  • Owner’s manual (English/ French/ Spanish)
  • Alpine Verification Certificate

…so you’ll need to remember to pick up whatever else you need before you start your installation, along with an amp wiring kit. I recommend picking up a good quality but great-priced 8 gauge wire kit like this one I found at Amazon.

It’s a lot less hassle to be prepared, and you sure don’t want to end up paying too much or having to run out for supplies while in the middle of your install work!

Specifications

For your convenience I’m including the specifications directly from the owner’s manual as well as details I’ve found myself.

Alpine MRV-F300 Specifications
  • 75W RMS x 4 (2Ω, 14.4V, ≤1% THD+N)
  • 50W RMS x 4 (4Ω, 14.4V, ≤1% THD+N)
  • 150W x 2 @ 4Ω
  • S/N ratio: >81dB @ 1W, >98dB @ rated power
  • Damping factor: >90
  • Front/rear adj. crossovers: Hi/low-pass, 50-500Hz, 12dB/oct.
  • 3/4 channel bass EQ feature (50Hz, +12dB)
  • High-level speaker inputs
  • Blue accent power-on light
  • Same power in a 40% smaller chassis
  • Evolution to Class D digital platform
  • Snap-on terminal covers for easy installation
  • Fuse: 40A
  • 1 year warranty
  • Compact size fits under seats
  • Dimensions: 8-1/4″W x 2-3/16″H x 7-15/16″D
  • Weight: 3.75 lbs (1.7kg)

You may have noticed that the signal-to-ratio ratio specified at 1W is lower than typical amplifiers. As I mentioned earlier, that’s an inherent design trait of Class D amps, but in practice with good speakers and the amp being sent a good signal level, it’s not really an issue.

I’m still pleased with the sound quality and wouldn’t recommend it if I didn’t feel you would be too.

Also note that the EQ boos is +12dB, in case you weren’t aware. That’s a very noticeable amount of bass increase.

Review score, pros & cons, and my final thoughts

I love this amp. For the money (it sells for a very reasonable price, usually somewhere close to $150 dollars or so) it’s a great buy.

As both an installer and a music lover I’d recommend it to nearly everyone except those who want extremely high signal-to-noise specs.

The MRV-F300 doesn’t disappoint as it’s a great performer – and definitely a great value, too!

Alpine MRV-F300 amplifier Editor's Choice image

Head over now to find out more and see why its one of the highest rated compact amps at Amazon.

Overall
8.7/10
8.7/10
  • Overall quality - 9/10
    9/10
  • Sound quality & performance - 8.7/10
    8.7/10
  • Installation ease - 9.2/10
    9.2/10
  • Features - 8/10
    8/10

A fantastic, great sounding 4 channel amp you'll be proud to own and can fit into small spaces

Is it small? It sure is! However, thanks to the superior Alpine design quality both music reproduction and power output are impressive for such a compact size. It’s a great performer musically and I love it. While many similarly priced class D amps by nature have a higher noise level than conventional Class A/B amps, Alpine has done a great job in minimizing noise.

Music is crisp, loud, and most of all enjoyable. This is an excellent amplifier for both aftermarket or factory stereos – with its small size it can fit safely away under seats or in storage areas. Factory systems gain the additional benefit of an auto-on sensing feature when the speaker level inputs are used. Not only that, but the included snap-on end caps round off a great-looking appearance nicely…and it’s priced close to the same as lower-quality competition models. Don’t pass this one up!

Pros

  • Excellent sound for a Class D amp
  • High efficiency – runs cool
  • 8 gauge wire terminals
  • Flexible crossovers built in
  • Bass boost switch
  • Small size fits in many small areas
  • Great looking finish & nice power-on light
  • End caps provided for clean install
  • Bridgeable for 150W RMS each channel pair
  • Speaker level inputs

Cons

  • Bass EQ boost only on channels 3/4
  • Normal Class D lower signal-to-noise ratio (improves as power output goes up)
  • Closed power terminals mean its difficult to fit 4 gauge wire
  • Mounting tabs face inward rather than outward – no option to change them
  • No remote knob available unlike the sibling MRV-M500
  • No 2/4 channel input switch
Marty

About the author

Marty is an experienced electrical, electronics, and embedded firmware design engineer passionate about audio and DIY. He worked professionally as an MECP-certified mobile installer for years before moving into the engineering field. Read more »

Your comments are welcome.
  1. Seem to have got your lbs versus kg a bit confused
    10 kg is 22 lbs
    Or
    5 lbs is 2.3 kg
    Sorry to criticise !!
    Enjoyed your article on class D amplifiers that’s how I got here
    Thanks for the memories and refresher course (Ex Radio Ham)

    Reply
    • Hi Ian. Thanks for letting me know as I’m not sure how I made that silly mistake. I corrected it.

      Glad you liked the class D amp article! Best regards. :)

      Reply
Leave a Comment